My Pink Stamper Blog Hop!

Welcome to the first stop on the My Pink Stamper Blog Hop. I am delighted to introduce myself and to get to know you better.

My name is CarrieAnne, and I am a wife, daughter, sister, aunt, and friend. A paper crafting veteran of over 15 years I've stayed up late snipping and gluing in my craft room, edited a magazine, taught tons of classes, and designed CHA booths. An avid scrapbooker and card maker, I also love creating 3D and altered art. From purses to pastries, I love recreating the world around me in paper. My "style" of art is characterized by strong color combinations, crisp clean lines, and lots of paper piecing and piercing. My Cricut helps me meet my eclectic crafting cravings and I am excited to share my projects with you.

For today's blog hop your challenge is to guess what our challenge was as designers. You will get a key word at each stop along the way so be sure to stay with me to the end of this post for your first clue and your next destination.

Birds and bird cages are super trendy right now and I have seen a number of variations on the web. I wanted to make a bird and cage just using my Cricut and I was able to do so with just one cartridge - Cindy Loo!

The Cage:

The base of the cage is made from the cupcake wrapper on page 74. I thought it was perfect because of the bird theme it showcases. In order that the inside and the outside of the cage bottom match, I cut two cupcake liners on "fit to page" on a 12x12 mat. They were then glued to together with Beacon Adhesive's Zip Dry.

The sides of the cage are four 1/4 x 12" strips of patterned paper. If you want the interior and exterior to match you will need to cut double the number of strips and glue them together as I did above. The four strips are held together by a brad at their midpoint. They are attached to the cupcake liner with small pieces of double sided red sticky tape.

The base of the bird cage is a spool of ribbon which I covered in dry embossed brown cardstock. The spool is necessary to stabilize the cage and makes it more durable. Red line tape was used to attach the spool to the cage and I tossed in some pretty pink buttons for fun.

The Bird

The bird is the sparrow from page 65. Two of them were cut out at 2" from white cardstock. I snipped off her wings and the little tuft at the top of her head. Each bird was then dry embossed with the Victorian Cuttlebug embossing folder. A 12" piece of fishing line was then placed between the two birds and they were glued together.

I added wings made from a heart cut in half, pink glitter and the pearl half back for the eye.

Caging the Bird

The fishing line goes through the hold in the bottom of the spool and is secured to the underside with tape. The other end of the line is threaded around the brad securing the strips of the cage's side. I added the glitter to the cage bottom by dipping a thin liner paint brush in white glue and dabbing the cage bottom in the glitter.

This little cage is fairly easy to assemble and would be cute on a wedding table as a decoration or hung up as Valentine's Day decor

Thanks for looking,

CarrieAnne
KEY WORD: DO
Next blog on the hop: Court's Crafts